Add to cart

GR3C-16 Bar Complete 400mm

£162.00 Including VAT (Ex-VAT: £135.00)

Add to cart

GR3C-27 Bar Complete 700mm

£235.20 Including VAT (Ex-VAT: £196.00)

Add to cart

GR3C-20 Bar Complete 500mm

£174.00 Including VAT (Ex-VAT: £145.00)

Add to cart

GR4-27-W Wide Chain 700x50mm (Single)

£414.00 Including VAT (Ex-VAT: £345.00)

Add to cart

GRP-7602 Drive Sprocket Makita® EK7650H/8100

£66.00 Including VAT (Ex-VAT: £55.00)

Add to cart

GRPEZ-10M Makita® Two-Stroke Throttle

£63.00 Including VAT (Ex-VAT: £52.50)

Showing all 6 results

There are three different sizes of GeoRipper® Minitrencher:

GR16 – with a 16″ (400mm) digging bar to trench up to 400mm deep.

GR20 – with a 20″ (500mm) digging bar to trench up to 500mm deep.

GR27 – with a 27″ (700mm) digging bar to trench up to 700mm deep.

There are three different chain widths: 1″ (25mm), 1.5″ (38mm) and 2″ (50mm)

The standard chain width on all models is 1.5″ (38mm) wide. Supplied in box of two.

A standard chain will cut a 38mm wide trench. An experienced operator can wriggle the GeoRipper® slightly whilst trenching to increase the trench width. The final width of the trench depends on the type of ground (sand, clay, gravel, …)

A 1″ (25mm) wide chain can be purchased as optional equipment. It is available in three different lengths: 16″ (400mm), 20″ (500mm) and 27″ (700mm). Supplied in box of two.

A 2″ (50mm) wide chain is also available but only in 16″ and 20″. It only fits certain models: Makita® EK7650H & EK8100, Husqvarna® K970 and Stihl® TS700. No additional equipment is needed to fit the optional 2″ digging chain. Supplied singly.

The GR16 is compatible with the following models: Makita® EK6101, EK7650H & EK8100 and the Husqvarna® K770.

The GR20 is compatible with the following models: Makita® EK6101, EK7650H & EK8100 and the Husqvarna® K770 & K970 and Stihl® TS700.

The GR27 is only suitable fitted on the more powerful models: Makita® EK8100, Husqvarna® K970 and Stihl® TS700.

The use of the EZ Kart is recommended for all GeoRipper® models and is supplied as standard with all GR27.

The EZ Kart is the same for all GeoRipper® models, just indicate your machine type for the correct throttle latch (Gold: Makita® EK6101 & EK8100, Silver: Makita® EK7650H, Orange: Husqvarna® or Red: Stihl®)